Please note: Importing new articles from Word documents is currently unavailable. We are working on fixing this issue soon and apologize for any inconvenience.

loading page

The role of injection method on residual trapping: bridging scales from centimeter to decimeter samples
  • +3
  • Catherine Spurin,
  • Sharon Ellman,
  • Tom Bultreys,
  • Takeshi Kurotori,
  • Sally Benson,
  • Hamdi A. Tchelepi
Catherine Spurin
Stanford University

Corresponding Author:[email protected]

Author Profile
Sharon Ellman
Ghent University
Author Profile
Tom Bultreys
Ghent University
Author Profile
Takeshi Kurotori
Imperial College London
Author Profile
Sally Benson
Stanford University
Author Profile
Hamdi A. Tchelepi
Stanford University
Author Profile

Abstract

The injection of CO2 into subsurface reservoirs provides a long term solution for anthropogenic emissions. A variable injection rate (such as ramping the flow rate up or down) provides flexibility to injection sites, and could influence the amount of residual trapping. Observations made in cm-scale samples showed that starting at a low flow rate established a flow pathway across the core, leading to a long term reduction in pore space utilization, as increases in flux were accommodated with little change in saturation. In this work we assess the scalability of these observations by performing experiments with variable injection rates in larger samples: 5 cm diameter and 12 cm length, compared to 2.5 cm diameter and 4.5 cm length in our previous work (Spurin et al., 2024). We observed that starting at a low flow rate did not lead to a long term reduction in pore space utilization. Instead saturation increased significantly with increased flux, leading to a higher pore space utilization than experiments where injection started with the higher flow rate. The difference in observations depending on sample size and the role of heterogeneity highlights potential uncertainties in upscaling experimental observations to field-scale applications.