loading page

A combined low and high cycle fatigue life prediction model considering the crack closure effect of micro-defects based on the continuous damage mechanics
  • +2
  • Xin Ding,
  • Xiaojun Yan,
  • Dawei Huang,
  • Zixu Guo,
  • Kaimin Guo
Xin Ding
Beihang University

Corresponding Author:[email protected]

Author Profile
Xiaojun Yan
Beihang University
Author Profile
Dawei Huang
Beihang University
Author Profile
Zixu Guo
Beihang University
Author Profile
Kaimin Guo
Research Institute of Aero-Engine Beihang University Beijing 100191 China
Author Profile

Abstract

In this study, a combined low and high cycle fatigue (CCF) life prediction model, which considers the crack closure effect (CCE) of micro-defects, is proposed based on the continuous damage mechanics. The CCF life prediction model is decomposed into three sub-models: the low cycle fatigue (LCF), high cycle fatigue (HCF) under the maximum stress of LCF (HCFLM), and their coupled damage models. The CCE is considered by taking one CCE parameter into the HCFLM sub-model. The experimental CCF data of K403 full-scale turbine blades under different vibration stresses is used to verify the accuracy of the proposed model to compare with other life prediction models. The prediction life from the proposed model falls within the 2 times of scatter band compared with the experimental results. Further, there are the different damage evolution forms at different vibration stresses. When the vibration stress is below 64.48MPa, the CCF damage mainly is caused by the LCF damage. However, while the vibration stress is higher than 64.48MPa, the HCFLM damage plays a major role in the CCF damage accumulation, and it is predicted that the CCF damage of the first stage serration on the K403 turbine blades is mainly from LCF.
19 Nov 2021Submitted to Fatigue & Fracture of Engineering Materials & Structures
19 Nov 2021Submission Checks Completed
19 Nov 2021Assigned to Editor
08 Dec 2021Reviewer(s) Assigned
03 Jan 2022Review(s) Completed, Editorial Evaluation Pending
07 Jan 2022Editorial Decision: Revise Major
28 Jan 20221st Revision Received
28 Jan 2022Submission Checks Completed
28 Jan 2022Assigned to Editor
03 Feb 2022Reviewer(s) Assigned
21 Mar 2022Review(s) Completed, Editorial Evaluation Pending
26 Mar 2022Editorial Decision: Revise Major
29 Mar 20222nd Revision Received
29 Mar 2022Submission Checks Completed
29 Mar 2022Assigned to Editor
30 Mar 2022Reviewer(s) Assigned
12 Apr 2022Review(s) Completed, Editorial Evaluation Pending
14 Apr 2022Editorial Decision: Accept