loading page

Effect of pneumatic shot peening on the high and low cycle combined fatigue life of K403 turbine blades
  • +3
  • Xin Ding,
  • Dawei Huang,
  • Xiaojun Yan,
  • Xiaoyong Zhang,
  • Mingjing Qi,
  • Zhiwei Liu
Xin Ding
Beihang University

Corresponding Author:[email protected]

Author Profile
Dawei Huang
Beihang University
Author Profile
Xiaojun Yan
Beihang University
Author Profile
Xiaoyong Zhang
Beihang University
Author Profile
Mingjing Qi
Beihang University
Author Profile
Zhiwei Liu
Beihang University
Author Profile

Abstract

The effect of pneumatic shot peening (PSP) on the fatigue properties of K403 turbine blades has been investigated under the high and low cycle combined fatigue (CCF) load with two types of blades: untreated blades and PSP treated blades. It is found that there is a threshold vibration stress which should be 194MPa. The PSP has a positive effect on the CCF life of blades mainly due to the compressive residual stress resulting in the reduction of the number of crack sources and propagation rate when vibration stresses are below the threshold vibration stress. However, the PSP treatment has no or negative effect when vibration stresses are above the threshold value. The compressive residual stress is released along with the microstructure changes of K403. Meanwhile, the microstructure changes, reflected in the precipitation of the lamellar MC carbides and σ phases, can accelerate the process of crack initiation and propagation.
28 Jul 2020Submitted to Fatigue & Fracture of Engineering Materials & Structures
29 Jul 2020Submission Checks Completed
29 Jul 2020Assigned to Editor
30 Jul 2020Reviewer(s) Assigned
09 Nov 2020Review(s) Completed, Editorial Evaluation Pending
23 Nov 2020Editorial Decision: Revise Major
29 Dec 20201st Revision Received
30 Dec 2020Submission Checks Completed
30 Dec 2020Assigned to Editor
08 Jan 2021Reviewer(s) Assigned
31 Jan 2021Review(s) Completed, Editorial Evaluation Pending
06 Feb 2021Editorial Decision: Revise Minor
11 Feb 20212nd Revision Received
11 Feb 2021Submission Checks Completed
11 Feb 2021Assigned to Editor
17 Feb 2021Review(s) Completed, Editorial Evaluation Pending
18 Feb 2021Editorial Decision: Accept
Jun 2021Published in Fatigue & Fracture of Engineering Materials & Structures volume 44 issue 6 on pages 1439-1454. 10.1111/ffe.13440