loading page

Inferring the Subsurface Geometry and Strength of Slow-moving Landslides using 3D Velocity Measurements from the NASA/JPL UAVSAR
  • +1
  • Alexander L Handwerger,
  • Adam M Booth,
  • Mong-Han Huang,
  • Eric J. Fielding
Alexander L Handwerger
Jet Propulsion Laboratory, Caltech, Jet Propulsion Laboratory, Caltech

Corresponding Author:[email protected]

Author Profile
Adam M Booth
Portland State University, Portland State University
Author Profile
Mong-Han Huang
University of Maryland, College Park, University of Maryland, College Park
Author Profile
Eric J. Fielding
Jet Propulsion Laboratory, Caltech, Jet Propulsion Laboratory, Caltech
Author Profile

Abstract

The hazardous impact and erosive potential of slow-moving landslides depends on landslide properties including velocity, size, and frequency of occurrence. However, constraints on size, in particular, subsurface geometry, are lacking because these types of landslides rarely fully evacuate material to create measurable hillslope scars. Here we use pixel offset tracking with data from the NASA/JPL Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) to measure the three-dimensional surface deformation of 134 slow-moving landslides in the northern California Coast Ranges. We apply volume conservation to infer the actively deforming thickness, volume, geometric scaling, and frictional strength of each landslide. These landslides move at average rates between ~0.1–3 m/yr and have areas of ~6.1 x 10^3–2.35 x 10^6 m^2, inferred mean thicknesses of ~1.1–25 m, and volumes of ~7.01 x 103–9.75 x 10^6 m^3. The best-fit volume-area geometric scaling exponent is γ ~ 1.2–1.5, indicating that these landslides fall between typical soil and bedrock landslide scaling. A rollover in the scaling relationship suggests that the largest landslide complexes in our dataset become large primarily by increasing in area rather than thickness. In addition, the slow-moving landslides display scale-dependent frictional strength, such that large landslide tend to be weaker than small landslides. This decrease in frictional strength with landslide size is likely because larger landslides are composed of higher proportions of weak material. Our work shows how state-of-the-art remote sensing techniques can be used to better understand landslide processes and quantify their contribution to landscape evolution and hazards to human safety.